How to Fixed Unreadable Ram on Laptops and Computers

Unreadable Ram can be solved with the right solution if we know what causes it on PCs, laptops and computers and deal with it so that it doesn’t happen again and makes your work get stuck on some brands of laptops asus, acer, by using the CPU-Z application you should can see the specifications of your memory.

Unreadable Ram

The use of Ram as a temporary storage medium is needed to ensure that all the performance of the PC can work as it should. for example, have Lae Murdani’s friends experienced a stalled boot, a blue screen laptop, or a computer that feels sluggish? It could just be the beginning of damaged memory. And over time it will not be read.

Unread Ram On Laptop And Computer

There are many types of PC RAM on the market today that you can choose if you want to upgrade or replace new memory. But don’t make the wrong choice.

Not only can it cause damage to the laptop’s RAM, it can also damage the motherboard and cause the memory to become unreadable.

Basically, Windows should be able to know the amount of RAM that is installed, but there are several triggers so that the memory becomes unreadable or even the amount of capacity does not match what is stated in the specifications.

For that, we will see clearly, in detail how to deal with unreadable RAM on laptops, computers, PCs, and notebooks so that we can find out the correct and correct solution as below.

Optimal Amount Of Ram Is Limited By The Motherboard

Please read the motherboard specifications before buying, one of which is to identify the optimal limit of RAM that can be installed which depends on each motherboard manufacturer.

The maximum capacity of a standard motherboard is 8 GigaBytes.

up to 64GB, and even more, are usually listed in spec sheets on manufacturers’ websites.

To determine whether the motherboard can read all of your RAM, enter the PC BIOS. To do this, restart your pc and press the key shown on the screen during startup (usually Del or F2 key).

Solution and Methods of Overcoming:

In fact, the motherboard has provided an optimal limit for the amount of memory that can be read by a PC, but if you really want to get even bigger RAM specifications, please upgrade the motherboard or change the PC with a higher spec.

Optimal Amount Of Ram Is Limited Type Windows

The operating system hinders the amount of RAM used in comparison between 32-bit and 64-bit, as some versions of Windows can also hinder this.

This is especially true of some editions of Windows 7, where Windows 7 New Arrival Edition supports up to 2GB of RAM, Windows 7 Home Basic supports up to 8GB on 64-bit, Windows 7 Home Premium supports up to 16GB on 64-bit, and Windows 7 Professional, Enterprise and Windows 7. Ultimate types support up to 192GB on 64-bit.

Solution and Methods of Overcoming:

Use conditions according to the specifications of the Windows you have, or immediately upgrade the operating system for the solution.

Ram Is Unrealable Due To Improper Installation

Maybe it’s another if the RAM can’t be read, it’s an improper installation or the wrong memory slot position. Turn off the PC or laptop and unplug all power cables,

Solution and Methods of Overcoming:

Unplug the RAM that is installed for a moment, and observe whether the holes in the leg of the unreadable memory are correct? Try to reinstall gently and confidently.

After that, try to check whether the memory slot is properly installed with the memory, check whether the locking clip is locked or in reverse, or even if it is placed in the wrong slot, especially for dual channel RAM.

Ram Is Not Detected Because Of Dirt And Dust

Usually the reason for unreadable RAM is due to dust and/or dust adhering to the chips and memory slots. This is an alibi that blocks the path of memory and motherboard information on laptops, so this is a memory source that is difficult to detect.

Sometimes it will be indicated by a continuous long beep or the umpteenth short beep according to the BIOS type used. If so, there is clearly a problem with the RAM and it needs to be fixed.

Solution and Methods of Overcoming:

Remove the RAM from the slot, then use the eraser to clean the memory chip, wipe the memory chip with the rubber eraser in the same direction, then turn it over again, and so on until it’s clean.

Use a scrub to clean the slot or RAM slot until it’s completely clean, then rinse, then install the memory, then check the results. Usually after carrying out this operation, the memory will be read and the computer screen will be displayed, and you can use the laptop normally.

If you have completed the method above, but it turns out that the RAM is still not being read, please try to repeat the operation above, sometimes it may take 3 attempts or more to read the memory normally.

Don’t forget to move the RAM to another slot on the motherboard. It may not be a problem with the memory, but since there is a problem with this slot, try moving the memory to another slot.

You have done this operation several times, but still can’t do it, try to replace it with another memory, you can borrow it from a friend, and then find that RAM detection means there is a problem with your memory, if so, you should change it.

Ram Upgrade Runs Away And Makes Ram Unrealable Perfectly

This usually occurs when upgrading a PC’s RAM, especially after an upgrade, sometimes the PC is abnormal, which can cause various problems, such as startup failure, no capacity increase, and a blue screen on the laptop.

This is entirely caused by unsupported hardware as well as unsupported software. Therefore, before upgrading, make sure everything matches and supports the specifications of the motherboard and the operating system used.

Solution and Methods of Overcoming:

If you use 2 x 4GB of memory (RAM) when upgrading, make sure the slot supports dual channel, 3 channel, 4 channel, and connect 2 pieces of memory to the slot of the same color, for example, insert 1 chip into the red slot slot, then insert the chip into the red slot again.

And don’t forget that the upgraded memory must support the motherboard. Make sure the upgraded memory has the same specifications as the RAM next to it, including series, frequency, speed, capacity, and even brand. This is a must try to get optimal results and balance.

When upgrading by changing the RAM it means 1 piece of memory is used, make sure the specifications match the motherboard. For example, if the motherboard has a capacity of 4GB per slot, then you have to look for 4GB RAM that matches the motherboard specifications.

Unlike if your RAM capacity per slot is 4GB, then you upgrade 1 memory capacity to 8GB which is clearly unreadable.

If it should be upgraded to 2, for example 2x4GB capacity, it can only be read by the motherboard. The key is not to exceed the minimum-maximum specifications of the motherboard.

If 2 RAM is not read, one of them tries to remove one of the Memory and check one by one.

If 22 RAM has been read (if 1 is installed), the motherboard does not support whether 2 memory chips are installed, so please check the motherboard specifications before buying RAM.

Even if the RAM is upgraded to 8GB, the RAM capacity can only be read half, but because the 32-bit operating system is used, the read capacity is half, and this 32-bit operating system can only read 4GB maximum memory capacity, so it will not be read .

The solution that can read all capacities is to install a 64-bit operating system, so you should use a 64-bit operating system for RAM above 4GB.

If you are already using 64-bit Windows, but are still using the onboard graphics processor, this is the reason why the RAM cannot be read completely. Since RAM will share a certain amount of graphics, the solution is to use a VGA card (graphics card).

If you have done this operation, but the RAM is still not read and its capacity has not increased, this could be caused by various reasons, such as a damaged PC RAM slot, incompatible memory, and specifications that do not match the motherboard.

After The Memory Has Been Exchanged, Ram Is Not Read

After trying to replace it, the RAM cannot be read, which could be caused by various factors, including the memory is not compatible with the motherboard, so it cannot be detected from the system, and the memory exceeds the slot capacity. Of course this will not be readable, and the RAM exceeds the frequency of the motherboard. This is one alibi why Specifications are hard to identify.

Solution and Methods of Overcoming:

Before changing and buying RAM. You must first check the minimum and maximum specifications of the laptop motherboard, if it exceeds the minimum and maximum, it is clear that it will not read the memory even if you start it, otherwise it will fail, so make sure that all motherboards can be used and supported.

There are many things that must be considered before changing the RAM, for example the slot must be the same as the memory (DDR1, DDR2, DDR3, DDR4), the series must match the motherboard, and the frequency speed must be the same as that supported by the motherboard.